Ikegami HLM-960WR Operation Manual page 33

switch on the front panel.
Default setting is OFF.
Setting the VECTOR SCOPE display brightness
Used to set the VECTOR SCOPE display
brightness in 3 levels: LOW, MID, HIGH and
HIGH(M).
HIGH(M) mode transmits with a picture and
displays it.
Default setting is HIGH.
Setting the VECTOR SCOPE display magnifica-
tion ratio
Used to set the VECTOR SCOPE display mag-
nification in 4 ratios: x1, x2, x4 and x8.
Default setting is x1.
Setting the COLOR BOX scale display
Used to set the VECTOR SCOPE s COLOR BOX
according to the input color bar signal: 75% and
100%.
Default setting is 100%.
HLM-960WR / 1760WR / 2460W
Setting the VECTOR SCOPE display position
Used to set the vector display to any of the RIGHT,
CENTER and LEFT positions.
When used in common with the WFM, the VEC-
TOR display is located on the left of the WFM one.
In the case of "RIGHT" setting, if the PinP function
is set to "Window (R)" mode, the vector display is
displayed on the left side of the sub screen.
In "LEFT" setting, when the PinP function is set
to "Window (L)" mode, the vector display is dis-
played on the right side of the sub screen.
Default setting is RIGHT.
RIGHT location
VECTOR
CENTER location
VECTOR
LEFT location
VECTOR
Setting the VECTOR SCOPE display color
Used to set the vector display color to either of
GREEN and WHITE.
Default setting is WHITE.
- -
23
VECTOR
WFM
VECTOR
WFM
VECTOR
WFM