Description Of Menu-Utility Functions - Ikegami HLM-960WR Operation Manual

HLM-960WR / 1760WR / 2460W

4-9 Description of MENU-UTILITY Functions

INPUT <UTILITY>
VIDEO CONT VR ASSIGN
AUDIO CONTRAST RANGE
TC/WFM/VSC TALLY
MARKER OSD TRANSPARENT
CAPTURE FORMAT DISPLAY
UTILITY SYSTEM LOCK
FUNC.SW BATTERY TYPE
P.REMOTE RETURN
UMD/IMD
USB MEMORY
C.CAPTION
NETWORK
RESET
INFO
EXIT
Setting the CONT VR ASSIGN
The "CONT" volume at the front can be operated
for the purpose of backlight adjustment.
CONT : Operates for the purpose of CONTRAST
adjustment
BL : Operates for the purpose of backlight ad-
justment
This setting is reflected on the PRESET
value.
Default setting is CONT.
Setting the CONTRAST RANGE
NORMAL Set the video level within the range
with no over-flow even if the con-
trast level is MAX.
WIDE The contrast level can be increased
to two times.
*High level video may saturate.
Default setting is NORMAL.
Setting the TALLY
Set any of the following display modes of the tally
lamps located at the top of the front of the moni-
tor.
R/G R is on the left side and G on the right side,
when facing the screen.
[R-TALLY ON] [G-TALLY ON]
G/R G is on the left side and R on the right side,
when facing the screen.
[G-TALLY ON] [R-TALLY ON]
R+G The entire tally is displayed.
CONT
NORMAL
R/G
LOW
3SEC
EXECUTE
AC/Ext.
The lamp is displayed in amber when both the
R-TALLY and G-TALLY are set at ON. Both R-
and G-TALLY at ON.
R/G ALL Displays the entire TALLY only when
it is solely set to ON.
If both R-TALLY and G-TALLY are set to ON,
they will be displayed on the left and right sides.
G/R ALL Displays the entire TALLY only when
it is solely set to ON.
If both R-TALLY and G-TALLY are set to ON,
they will be displayed on the left and right sides.
Default setting is R/G.
Setting the OSD TRANSPARENCY
The background for displaying the OSD can be set
on 3 levels: LOW (semi-transparent) to HIGH
(transparent).
Default setting is LOW.
- -
36
<LOCK ALL/PRESET>
COPNFIG UNLOCK
ENTER PASSWORD
POWER ON CONFIG OFF
SAVE CONFIG EXECUTE
RETURN
R-TALLY ON]
[G-TALLY ON]
[Both R and G-TALLY at ON]
R-TALLY ON]
[G-TALLY ON]
[Both R and G-TALLY at ON]
←[R-TALLY ON]
[G-TALLY ON]
[Both R and G-TALLY at ON]