Description Of Menu-Capture Functions - Ikegami HLM-960WR Operation Manual

4-8 Description of MENU-CAPTURE Functions

INPUT <CAPTURE>
VIDEO SCR CAPTURE
AUDIO AREA
FULL CAPTURE
TC/WFM/VSC
MARKER CHG MANUAL
CAPTURE CHG AUTO
UTILITY INTERVAL
FUNC.SW <TO USB MEMORY>
P.REMOTE FILE NO.
UMD/IMD SAVE DATA
LOAD DATA
USB MEMORY
C.CAPTION RETURN
NETWORK
RESET
INFO
EXIT
Executing the 2-picture split screen mode
Used to execute this mode to capture a still image
of an input signal and compare it with other live
inputs.
1. With EXECUTE
press the RE.
2. The display changes as shown below. Press
the RE again to capture the image.
EXECUTE SET RETURN ESC
3. Switch the input and compare its image with
the taken-in still image. To take in another
image or to quit the 2-picture split screen
mode, press the ESC switch.
Captured Image
* The 2-picture split screen mode opeates with
signals of the same format. If different-format
signals are input, the images cannot be properly
displayed.
* With ASPECT set at [16:9], an SDTV signal is
converted to [4:3].
Setting the 2-picture split screen display area
Used to set the display area in the 2-picture split
screen mode.
FULL: Full image displayed
EXECUTE
FULL
EXECUTE
EXECUTE
EXECUTE
5V
1
EXECUTE
EXECUTE
flashing in magenta,
Live input signal
- -
31
HLM-960WR / 1760WR / 2460W
4:3: Image in the central 4:3 area displayed
Default setting is FULL.
* This function operates with HDTV-format input
signals only.
HDTV < FULL >
Executing the full capture mode
This mode enables capturing the image that has
been input in the full-screen mode.
When the EXECUTE command is given, the
MENU will appear at the lower left hand corner
of the screen. When the RE is pressed, the full
screen image will be captured. By pressing the
ESC switch, the Input Signal mode will be re-
sumed.
This function can be assigned to a function switch
on the front panel.
HDTV < 4:3 >
Back to the
MENU display