Configure Temperature Measurement Unit; Configure Temperature Damping - Emerson Micro Motion 2700 Configuration And Use Manual

4.6.1

Configure Temperature Measurement Unit

Display
ProLink II
ProLink III
Field Communicator Configure > Manual Setup > Measurements > Temperature > Temperature Unit
Overview
Temperature Measurement Unit specifies the unit that will be used for temperature
measurement.
Procedure
Set Temperature Measurement Unit to the option you want to use.
The default setting is Degrees Celsius.
Options for Temperature Measurement Unit
The transmitter provides a standard set of units for Temperature Measurement Unit. Different
communications tools may use different labels for the units.
Table 4-12:
Unit description
Degrees Celsius
Degrees Fahrenheit
Degrees Rankine
Kelvin
4.6.2

Configure Temperature Damping

Display
ProLink II
ProLink III
Field Communicator Configure > Manual Setup > Measurements > Temperature > Temp Damping
Configuration and Use Manual
OFF-LINE MAINT > OFF-LINE CONFG > UNITS > TEMP
ProLink > Configuration > Temperature > Temp Units
Device Tools > Configuration > Process Measurement > Temperature
Options for Temperature Measurement Unit
Display
°C
°F
°R
°K
Not available
ProLink > Configuration > Temperature > Temp Damping
Device Tools > Configuration > Temperature
Configure process measurement
Label
ProLink II ProLink III
degC °C
degF °F
degR °R
degK °K
Field Commu-
nicator
degC
degF
degR
Kelvin
51