Configure Descriptor; Configure Message - Emerson Micro Motion 2700 Configuration And Use Manual

•
5.6.1

Configure Descriptor

Display
ProLink II
ProLink III
Field Communicator Configure > Manual Setup > Info Parameters > Transmitter Info > Descriptor
Overview
Descriptor lets you store a description in transmitter memory. The description is not used in
processing and is not required.
Procedure
Enter a description for the transmitter.
You can use up to 16 characters for the description.
5.6.2

Configure Message

Display
ProLink II
ProLink III
Field Communicator Configure > Manual Setup > Info Parameters > Transmitter Info > Message
Overview
Message lets you store a short message in transmitter memory. This parameter is not used
in processing and is not required.
Procedure
Enter a short message for the transmitter.
Your message can be up to 32 characters long.
Configuration and Use Manual
- Message
Date
-
Sensor parameters
Sensor Serial Number
-
Sensor Material
-
Sensor Liner Material
-
Sensor Flange Type
-
Not available
ProLink > Configuration > Device > Descriptor
Device Tools > Configuration > Informational Parameters > Transmitter
Not available
ProLink > Configuration > Device > Message
Device Tools > Configuration > Informational Parameters > Transmitter
Configure device options and preferences
95