Configure device options and preferences
5.6.3
Configure Date
Display
ProLink II
ProLink III
Field Communicator Configure > Manual Setup > Info Parameters > Transmitter Info > Date
Overview
Date lets you store a static date (not updated by the transmitter) in transmitter memory.
This parameter is not used in processing and is not required.
Procedure
Enter the date you want to use, in the form mm/dd/yyyy.
Tip
ProLink II and ProLink III provide a calendar tool to help you select the date.
5.6.4
Configure Sensor Serial Number
Display
ProLink II
ProLink III
Field Communicator Configure > Manual Setup > Info Parameters > Sensor Information > Sensor Serial Number
Overview
Sensor Serial Number lets you store the serial number of the sensor component of your
flowmeter in transmitter memory. This parameter is not used in processing and is not
required.
Procedure
1.
2.
96
Not available
ProLink > Configuration > Device > Date
Device Tools > Configuration > Informational Parameters > Transmitter
Not available
ProLink > Configuration > Sensor > Sensor S/N
Device Tools > Configuration > Informational Parameters > Sensor
Obtain the sensor serial number from your sensor tag.
Enter the serial number in the Sensor Serial Number field.
®
Micro Motion
Model 2700 Transmitters with Analog Outputs