Table of Contents
Advertisement
Intended Use
Auto QC² is used for acceptance procedures and quality control tests of
medical CR systems, especially Agfa Digitizers and plates. Auto QC² will be
used in:
• The production of CR systems.
• Acceptance procedures of new installations.
• Quality control procedures performed by the customers.
Table 1: Intended use of Auto QC².
Category
Device Type
Role of the Device
Environment of use • In X-ray rooms.
Medical area
Description
Quality Control Device.
Quality Control.
• Outside X-ray rooms.
• Private radiologist sites.
• Clinics.
• Imaging centers.
• Emergency rooms.
• Intensive care sites.
• Mobile environments.
• General Radiology (GenRad).
• Pediatrics.
• Uro/Tomo.
• Dental.
• Radiotherapy (only for acceptance procedures by
Agfa Service personnel).
Auto QC² | Introduction | 9
2370C EN 20180330 1524
Advertisement
Table of Contents
