Hot-Swap Power Supply Status Leds - Lenovo ThinkServer TS460 User Manual And Hardware Maintenance Manual

Figure 11. Front view
1
24-pin power connector
3
12-pin power connector
5
Power management bus (PMBus) connector
7
Power supply connector 2
1 24-pin power connector
Used to connect to the power connector on the system board.
2 4 8-pin power connector
Used to connect to the power connectors on the backplanes.
3
12-pin power connector
Used to connect to the CPU power connector on the system board and the ODD/tape drive.
3 PMBus connector
Used to connect to the PMBus connector on the system board.
6 7 Power supply connectors
Used to connect hot-swap redundant power supplies.

Hot-swap power supply status LEDs

Each hot-swap power supply has three status LEDs.
Figure 12. Hot-swap power supply status LEDs
1 Input status LED
26
ThinkServer TS460 User Guide and Hardware Maintenance Manual
2
8-pin power connector
4
8-pin power connector
6
Power supply connector 1
3
2
1