ThinkServer RAID Super Capacitor Module
The ThinkServer RAID Super Capacitor Module protects the cache memory on the installed ThinkServer
RAID card.
• "Removing the ThinkServer RAID Super Capacitor Module" on page 99
• "Installing the ThinkServer RAID Super Capacitor Module" on page 100
Note: Use any documentation that comes with the ThinkServer RAID Super Capacitor Module and follow
those instructions in addition to the instructions in this topic.
Removing the ThinkServer RAID Super Capacitor Module
To remove the ThinkServer RAID Super Capacitor Module (hereinafter referred to as the Super Capacitor
Module), do the following:
Watch the procedure. A video of the removing process is available at:
• Youtube:
https://youtu.be/PSqt1BfoOhM
• Youku:
http://v.youku.com/v_show/id_XMjYwODgwMjk1Ng==.html?&f=49135033&from=y1.2
1. Prepare your server and remove the server cover. See "Preparing your server in advance and removing
the server cover" on page 55.
2. Disconnect the cable of the Super Capacitor Module from the RAID card.
3. Press the tab on the Super Capacitor Module bracket as shown and pull the Super Capacitor Module
out of the bracket.
Figure 71. Removing the ThinkServer RAID Super Capacitor Module from the bracket
4. If you are going to remove the Super Capacitor Module bracket, gently press the tab on the bracket and
pull the bracket to remove it from the chassis.
1
2
.
Chapter 5
Replacing hardware
99