Lenovo ThinkServer TS460 User Manual And Hardware Maintenance Manual page 102

• Youku:
http://v.youku.com/v_show/id_XMjYwODczOTM5Mg==.html?&f=49135033&from=y1.2
1. Prepare your server and remove the server cover. See "Preparing your server in advance and removing
the server cover" on page 55.
2. Remove the front bezel. See "Removing the front bezel" on page 57.
3. Locate the front panel board assembly and disconnect cables from the system board. See "Server
components" on page 22.
4. Press the release tab in the direction as shown and pivot the front panel board assembly outward. Pull
the cables out to completely remove the front panel board assembly from the chassis.
Figure 62. Removing the front panel board assembly
5. Disconnect cables from the front panel board assembly. Then, install a new front panel board assembly.
See "Installing the front panel board assembly" on page 90.
6. If you are instructed to return the old front panel board assembly, follow all packaging instructions and
use any packaging materials that are supplied to you for shipping.
Installing the front panel board assembly
To install the front panel board assembly, do the following:
Watch the procedure. A video of the installation process is available at:
• Youtube: https://youtu.be/RwdxbBAnKsQ
• Youku: http://v.youku.com/v_show/id_XMjYwODcwODk2MA==.html?&f=49135033&from=y1.2
1. Prepare your server and remove the server cover. See "Preparing your server in advance and removing
the server cover" on page 55.
2. Remove the front bezel. See "Removing the front bezel" on page 57.
3. Connect cables to the new front panel board assembly and route cables through the corresponding hole
in the chassis.
90
ThinkServer TS460 User Guide and Hardware Maintenance Manual
2
1