Lenovo ThinkServer TS460 User Manual And Hardware Maintenance Manual page 104

1. Prepare your server and remove the server cover. See "Preparing your server in advance and removing
the server cover" on page 55.
2. Locate the front system fan 1. Then, disconnect the front system fan 1 cable from the front system fan 1
connector on the system board. See "System board components" on page 31.
3. Press the two tabs of the front system fan 1 towards each other and carefully slide the front system fan 1
out of the chassis simultaneously.
Figure 64. Removing the front system fan 1
4. If you are instructed to return the old front system fan 1, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
Installing the front system fan 1
To install the front system fan 1, do the following:
Watch the procedure. A video of the installation process is available at:
• Youtube: https://youtu.be/qAvrMzrpnbc
• Youku: http://v.youku.com/v_show/id_XMjYwODcwODI4MA==.html?&f=49135033&from=y1.2
1. Prepare your server and remove the server cover. See "Preparing your server in advance and removing
the server cover" on page 55.
2. If needed, remove the old front system fan 1. See "Removing the front system fan 1" on page 91.
3. Position the new front system fan 1 into the chassis so that the two tips
corresponding holes in the mounting area. Meanwhile, ensure that the two posts
fan 1 are aligned with the corresponding holes in the inner side of the chassis. Then, carefully slide the
front system fan 1 into the chassis until it snaps into position.
92
ThinkServer TS460 User Guide and Hardware Maintenance Manual
0
M
G M
T
1
2
1
3
4
2
ID
1
2
1
1
are aligned with the
2 of the front system