Lenovo ThinkServer TS460 User Manual And Hardware Maintenance Manual page 106

• Youku:
http://v.youku.com/v_show/id_XMjYwODgwMTQ0MA==.html?&f=49135033&from=y1.2
1. Prepare your server and remove the server cover. See "Preparing your server in advance and removing
the server cover" on page 55.
2. Locate the rear system fan. Then, disconnect the rear system fan cable from the rear system fan
connector on the system board. See "System board components" on page 31.
3. Press the two tabs of the rear system fan towards each other and carefully slide the rear system fan out
of the chassis simultaneously.
Figure 66. Removing the rear system fan
4. If you are instructed to return the old rear system fan, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
Installing the rear system fan
To install the rear system fan, do the following:
Watch the procedure. A video of the installation process is available at:
• Youtube:
https://youtu.be/XhiORYpJ4fE
• Youku:
http://v.youku.com/v_show/id_XMjYwODcxNjE1Ng==.html?&f=49135033&from=y1.2
1. Prepare your server and remove the server cover. See "Preparing your server in advance and removing
the server cover" on page 55.
2. If you are replacing an old rear system fan, remove it first. See "Removing the rear system fan" on page
93.
3. Position the new rear system fan into the chassis so that the four tips on the fan are closely aligned with
the corresponding holes in the mounting area.
94
ThinkServer TS460 User Guide and Hardware Maintenance Manual
1
2
1