Lenovo ThinkServer TS460 User Manual And Hardware Maintenance Manual page 94

1. Do one of the following:
• If you are replacing a failed hot-swap power supply, remove a hot-swap power supply. See
"Removing a hot-swap power supply" on page 81.
• If you are installing a second hot-swap power supply to the server, remove the EMI shield first. Insert
two fingers into the holes in the EMI shield and carefully pull the EMI shield out of the chassis. Store
the shield in case you later remove the power supply and need the shield to cover the bay.
Figure 52. Removing the protective shield for the power supply bay
2. Note the orientation of the hot-swap power supply, and then slide it into the chassis until it snaps into
position.
82
ThinkServer TS460 User Guide and Hardware Maintenance Manual
0
M G M
T
1
2
1
3
4
2
ID