Heat Sink And Fan Assembly - Lenovo ThinkServer TS460 User Manual And Hardware Maintenance Manual

Figure 68. Installing the rear system fan
5. Connect the new rear system fan cable to the rear system fan connector on the system board. See
"System board components" on page 31.

Heat sink and fan assembly

• "Removing the heat sink and fan assembly" on page 96
• "Installing the heat sink and fan assembly" on page 97
CAUTION:
The heat sink and fan assembly might be very hot. Turn off the server and wait three to five minutes to
let the server cool before removing the server cover.
Removing the heat sink and fan assembly
To remove the heat sink and fan assembly, do the following:
Watch the procedure. A video of the removing process is available at:
• Youtube: https://youtu.be/E7VV3rhXYVk
• Youku: http://v.youku.com/v_show/id_XMjYwODc0ODgyNA==.html?&f=49135033&from=y1.2
1. Prepare your server and remove the server cover. See "Preparing your server in advance and removing
the server cover" on page 55.
2. Lay the server on its side for easier operation.
96
ThinkServer TS460 User Guide and Hardware Maintenance Manual
0
M
G M
T
1
2
1
3
4
2
I D