Configuring An Access Control Policy; Displaying And Maintaining Pki - 3Com 4510G Configuration Manual

To do...
Enter system view
Delete certificates

Configuring an Access Control Policy

By configuring a certificate attribute-based access control policy, you can further control access to the
server, providing additional security for the server.
Follow these steps to configure a certificate attribute-based access control policy:
To do...
Enter system view
Create a certificate attribute
group and enter its view
Configure an attribute rule for
the certificate issuer name,
certificate subject name, or
alternative subject name
Return to system view
Create a certificate
attribute-based access control
policy and enter its view
Configure a certificate
attribute-based access control
rule
A certificate attribute group must exist to be associated with a rule.

Displaying and Maintaining PKI

To do...
Display the contents or request
status of a certificate
Display CRLs
Display information about one
or all certificate attribute groups
Use the command...
system-view
pki delete-certificate { ca | local } domain
domain-name
Use the command...
system-view
pki certificate attribute-group
group-name
attribute id { alt-subject-name
{ fqdn | ip } | { issuer-name |
subject-name } { dn | fqdn |
ip } } { ctn | equ | nctn | nequ }
attribute-value
quit
pki certificate
access-control-policy
policy-name
rule [ id ] { deny | permit }
group-name
Use the command...
display pki certificate { { ca |
local } domain domain-name |
request-status }
display pki crl domain
domain-name
display pki certificate
attribute-group { group-name
| all }
10-12
Remarks
—
Required
Remarks
—
Required
No certificate attribute group
exists by default.
Optional
There is no restriction on the
issuer name, certificate subject
name and alternative subject
name by default.
—
Required
No access control policy exists
by default.
Required
No access control rule exists
by default.
Remarks
Available in any view
Available in any view
Available in any view