Moving Method; Detailed Specifications - EBARA A70W Instruction Manual

(4)

3.3.2 Moving Method

Move pump slowly by pushing eyebolt along the long axis of the pump (Direction A). Keep
toes and fingers away from moving wheels. If placing the pump in a corner or narrow space
requires moving it along the short axis (Direction B), two persons should "walk" the pump
over by alternately pushing the ends as shown below.
B
To move the pump across cracks or joints in the floor, spread a steel plate or similar device,
which can sustain the pump's weight, over the discontinuity. At least two persons, using
great caution, should move the pump.
DANGER

3.4 Detailed Specifications

Refer to the following tables and figures for detailed specifications, size, and pump
performance.
Category
Table 3.1, 3.2
Outline Drawing 1
Outline Drawing 2
Outline Drawing 3
Outline Drawing 4
Outline Drawing 5
Figure 3.1
Figure 3.2
Figure 3.3
Figure 3.4
A
If, when moving a pump, it loses balance and starts to tip over, do
not attempt to stop it. Get away from the pump immediately and
let it fall.
List of Tables and Figures
Contents
Specification
A70W
A30W
A25S
A10S
A07V
Performance Curve (A70W, A30W)
Performance Curve (A25S, A10S)
Performance Curve (A07V)
System Flow
Steel Plate
EBARA Corporation
Page
5,6
7
8
9
10
11
12
13
14
15