Table of Contents
Advertisement
TresCon UNO
ba43134e08
05/2017
Input the PIN digit-by-digit with 68. Change the digit
4
with 57 and confirm with 3.
Call up the parameters to be changed with 68 and
5
switch into input mode with 3.
Enter the time period required digit-by-digit with 68.
6
Change to the next digit with 57.
Confirm the input with 3 and, if required, repeat steps 5 and
7
6 for any other parameters.
Leave the menu with 4. The prompt Save appears.
8
Select Yes or No with 68 and confirm with 3.
9
5.2.3 Mean values
You can calculate and display the mean value, minimum and maximum
value. You can enter a reference day for calculation (up to 4 weeks in
the past) and the period for this.
Parameter
Reference day
Reference period
Note
The formation of a mean value is only possible with the main measured
variable of the analyzer module.
Values
Date (dd.mm.yy),
up to a max. of 28 days back
Period of time of (hh:mm)
up to (hh:mm)
Operation
5 - 21
Advertisement
Table of Contents
