Entering/Changing Values - Example - wtw TresCon UNO A111 Operating Manual

Operation
5 - 10

5.1.6 Entering/changing values - Example

The parameter AutoClean Interval in the AutoClean menu of the analy-
zer module PO4-P is changed in this example.
Note
The parameters of the analyzer module, PO4-P, are described in the
relevant section of the operating manual.
1 Measuring mode
Press 3. The main menu of the analyzer module appears
on the display.
Select the AutoClean menu item with 68 and confirm
2
with 3. The prompt Presentation of data/Change appears.
Select the Change mode with 68 and confirm with
3
3.
TresCon UNO
ba43134e08 05/2017