Operating Elements - wtw TresCon UNO A111 Operating Manual

Operation
Controller
Key functions
5 - 2

5.1.1 Operating elements

The TresCon UNO is operated via the controller:
TresCon
Fig. 5-1 Operating elements of the controller
Key Function per key stroke
Immediately starts an automatic calibration (AutoCal)
for the selected analyzer module. The current action is
terminated/stopped.
Switches immediately into the measuring mode. A rou-
tine is started (AutoClean or AutoCal) if required. The
current action is terminated/stopped.
Switches to the next menu level. Confirms inputs and
switches to the select/input mode for parameterization.
Switches to the next higher menu level. Calls up the
query Store during parameterization.
Switches from the measuring mode to the main menu
of the controller software (General Parameters).
and,
at the same
time,
Immediately stops the current program run (in the
measuring mode, if <<Stop appears in the status line)
and moves the cursor one position to the left.
TresCon UNO
Display
Measure key
Calibrate key
Return key
Coursor keys
Escape key
ba43134e08 05/2017