Table of Contents
Advertisement
Installation
3 - 28
3.6.3 Maintenance of the overflow vessel with valve
Clean the overflow vessel regularly as follows:
1
Open the outlet valve:
– In case of control by the TresCon UNO, proceed according
to section 6.1.2 T
page 6-4.
– In case of SPC control, provide a switching voltage at the
control line.
2
Remove the lid of the overflow vessel (to do so, loosen the
knurled-head screws).
3
Clean the inside of the overflow vessel using a suitable brush
and rinse it with plenty of distilled H2O.
4
Close the lid of the overflow vessel.
5
Close the outlet valve (see step 1).
EST OF THE RELAYS AND VALVES
TresCon UNO
on
ba43134e08
05/2017
Advertisement
Table of Contents
