Recorder Function; General; Setting Up The Recorder - wtw TresCon UNO A111 Operating Manual

Operation
Recorder functions
Selecting and allocating
the recorder
5 - 50
5.4

Recorder function

5.4.1 General

A total of three recorders is available. You can allocate one or more
measured variables to a recorder. Available measured variables are:
 Main measured variable, provided by any measuring module
 Secondary measured variable, e. g. SAK value provided by the
NOx-N/SAK measuring module
A recorder can perform the following functions:
Function
Not assigned
Record of measured values
Controller
Control

5.4.2 Setting up the recorder

1 Measuring mode
Call up the General Parameters menu: Simultaneously press
the keys, 4 and 2.
Select the Recorder function menu item with 68 and
2
confirm with 3. The prompt Presentation of data/Change
appears.
Select the Change mode with 68 and confirm with
3
3.
Input the PIN digit-by-digit with 68. Change the digit
4
with 57 and confirm with 3.
Recorder parameters
None - recorder has no function
see page 5-54
see page 5-54
see page 5-57
ba43134e08
TresCon UNO
05/2017