Operation
94
4.2.6 Printing/transmitting measured values
Measured values (data records) can be:
l
printed on the integrated printer or
l
transmitted to the interface.
Note
To print, you must switch on the printer using the Print key
o
(Print LED lights up green).
To transmit to the interface, you must connect the interface
cable. The integrated printer is then switched off
automatically.
You can print/transmit measured values (data records) in 3
ways:
Switch on the data transmission (Int 2) (see page 110)
– After expiry of the selected interval, the current data
record is sent to the printer/interface.
l
Switch on AutoStore (Int 1) (see page 103)
– After expiry of the selected interval, the current data
record is sent to the printer/interface and in addition is
stored in the data store of the instrument.
– AutoStore (Int 1) covers the data transmission interval
(Int 2).
g
l
Press the
key
This manually triggers a printout of the current measured
values at any time - independently of the selected
intervals.
Note
If you connect a recorder (analog output), both the output to
the integrated printer and the digital output are switched off.