Table of Contents
Advertisement
Operation
Viewing/changing
parameters
5 - 64
5.5.3 RS485 (Master) interface parameters
The controller only reacts in the Master mode to output measured
values to a printer.
Note
The chapter 8.3 RS485 contains general information on the applica-
tions of the RS485 interface and provides examples of these applica-
tions.
Data
You can display the interface parameters. You can only change the
Operating mode parameter:
Mode
Baud rate
Data bits
Stop bits
Parity
1
Measuring mode
Call up the General Parameters menu: Simultaneously press
the keys, 4 and 2.
Select the Interfaces menu item with 68 and confirm
2
with 3. The prompt Presentation of data/Change appears.
Select the Change mode with 68 and confirm with
3
3.
Input the PIN digit-by-digit with 68. Change the digit
4
with 57 and confirm with 3. The Interface Parame-
ters menu appears on the display providing a view of the
RS232 interface.
Select the selection mode with 3 and select the RS485
5
interface with 68.
Master, Slave
9600
8
1
None
TresCon UNO
ba43134e08
05/2017
Advertisement
Table of Contents
