Table of Contents
Advertisement
Chapter 1 Before Use
Rear Side and Right Side of the Machine
1-4
Clamp lever (rear)
Interlocks with the clamp lever in
the font of this machine.
USB connector
This is a USB 2.0 interface connector.
LAN connector
Use this connector when you use network functions.
Main power switch (INLET 1)
Turns on/off the main power for this machine. Leave
the main power turned on to prevent ink clogging.
AC inlet
Connect the power cable to the AC inlet.
Vent filter box
Vents the ink mist
generated during printing.
Roll holder
Grabs the roll media by the ends of
its paper core to hold the media in
place. It supports 2-inch and 3-inch
paper cores.
Advertisement
Table of Contents
