MIMAKI UCJV300-75 Operation Manual page 38

Chapter 2 Basic Operation
Media size and grit rollers (UCJV300/150-160)
The grit rollers to be used vary depending on the size of the media.
• To feed the media smoothly, select the appropriate grid roller positions so that the media can be held at equally spaced
intervals.
• When the grid rollers to be used are determined, adjust the pinch roller unit by referring to "P.2-5 「How to adjust the pinch
roller」".
• You can use any number of pinch roller units from 2 to 7.
• The pinch rollers at the left and right ends of the media must be located within 10 cm and 2 cm of the ends of the media,
respectively. If they are positioned further from the ends of the media, some part of the media remains uncut.
2-6
Determine the grid rollers to be used according to the
size of the media.
GR11 GR10 GR11 GR10 GR9 GR9 GR8 GR8
1577 ~ 1620mm 1577 ~ 1620mm
1446 ~ 1514mm 1446 ~ 1514mm
1212 ~ 1272mm 1212 ~ 1272mm
1501 ~ 1561mm 1501 ~ 1561mm
1370 ~ 1438mm 1370 ~ 1438mm
1136 ~ 1196mm 1136 ~ 1196mm
1413 ~ 1473mm 1413 ~ 1473mm
1284 ~ 1350mm 1284 ~ 1350mm
1048 ~ 1108mm 1048 ~ 1108mm
GR7 GR7 GR6 GR6 GR5 GR5 GR4 GR4
GR3 GR3
1032 ~ 1092mm 1032 ~ 1092mm
732 ~ 792mm 732 ~ 792mm
576 ~ 644mm 576 ~ 644mm
364 ~ 424mm 364 ~ 424mm
241 ~ 301mm 241 ~ 301mm
956 ~ 1016mm 956 ~ 1016mm
656 ~ 716mm 656 ~ 716mm
500 ~ 568mm 500 ~ 568mm
288 ~ 348mm 288 ~ 348mm
165 ~ 225mm 165 ~ 225mm
868 ~ 928mm 868 ~ 928mm
568 ~ 628mm 568 ~ 628mm
414 ~ 480mm 414 ~ 480mm
200 ~ 260mm 200 ~ 260mm
85 ~ 137mm 85 ~ 137mm
The right end of the media
should come within this
range.
GR2 GR2
GR1 GR1
GR: Grit roller