Table of Contents
Advertisement
6
Clean the cap rubber.
• Wipe off the ink sticking to the cap rubber with a
clean stick dipped in maintenance washing liquid
for maintenance.
• Wipe off so that maintenance solution for
maintenance will not remain.
• At this time, the discharge passage is cleaned
automatically.
Cap rubber
7
Press the
key.
8
Fill up the cap with cleaning solution for
maintenance.
• Suck maintenance solution into a dropper and fill
up the cap with it. Fill up the cap with
maintenance solution on the verge of overflow
from the cap.
• Until washing liquid is filled, [COMPLETED
NEXT [ENT]] is displayed on the screen. After
the work up to the Step 8 is completed and you
close the front cover, press the [ENTER] key.
9
Press the
key.
• The nozzles are washed.
• When the nozzles have been completely washed,
cleaning is performed automatically, and the head
moves to the maintenance position.
10
Open the front cover.
11
Fill up the cap with cleaning solution for
maintenance.
• Suck maintenance solution into a dropper and fill
up the cap with it. Fill up the cap with
maintenance solution on the verge of overflow
from the cap.
12
Close the front cover, and press the
key.
• After its initial operation, the machine returns to
step 2.
Chapter 5 Maintenance
5-11
5
2
Advertisement
Table of Contents
