MIMAKI UCJV300-75 Operation Manual page 30

Ucjv300 series; ucjv150 series uv inkjet printer cutter
Hide thumbs Also See for UCJV300-75:
Table of Contents

Advertisement

Chapter 1 Before Use
Expiration date of the ink
The ink bottle has an expiration date.
Although you can continue using the ink bottle until two
months after the expiration date specified on the ink
bottle, when three months elapses from the expiration
date, the ink bottle becomes unusable.
A warning message appears when an ink bottle becomes
unusable. When this message appears, replace the
applicable ink bottle.
Example: If April 2018 is specified as the expiration date:
May: Usable
June: Usable (solid yellow LED)
July: Unusable (blinking red LED)
Ink end and ink near end
A warning message appears at ink near end (when the
remaining ink level is low). When this message appears,
we recommend that you replace the applicable ink bottle
as soon as possible.
A warning message appears at ink end (when the ink is
empty). When this message appears, replace the
applicable ink bottle.
Ink bottle lamps
The lamps located above the ink bottles tell you the status
of the installed ink bottles.
Ink bottle lamps
Lamp status
Solid blue
Normal (ink is being supplied)
Off
Normal
Solid yellow
One of the following errors has occurred:
or blinking
• Ink near end
yellow
• One month past the expiration date
Blinking red
Two months past the expiration date
One of the following errors has occurred:
• Ink end
Solid red
• No ink IC chip inserted
• Other ink errors (
1-16
Description
P.6-6)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ucjv300-160Ucjv300-107Ucjv300-130Ucjv150-160

Table of Contents