Figure 6: Datastick Interface Options; Figure 7: Communications Adapter - Thermo Scientific Scientific AquaSensors DataStick User Manual

Schematically as shown in Figure 6, any DataStick system can be connected directly to a computer network to obtain 24 bit data and
interactive measurement, configuration, calibration and diagnostic capability.
Digital Gateway
2 Isolated mA Loops
2 Form C Relays
Interchangeable communications adapters currently supported include:
Communications
Suggested Application
Adapter
Laboratory PC
USB ASCII
Field Diagnostics with Laptop
RS-232 ASCII Laboratory PC
Modbus RTU
AV38 Local Display
over RS-232
PLC with Modbus Network
or RS-485
DeviceNet PLC with DeviceNet Network
CANopen PLC with CANopen Network
Profibus DP V1 PLC with Profibus Network
Ethernet/IP Web connected
Thermo Scientific AquaSensors™ DataStick™ Measurement System User Guide
PC, PLC, DCS or PDA
Modbus
AV38 Local Display

Figure 6: DataStick Interface Options

Standard Software Interface
AquaComm™, HyperTerminal
AquaComm™, HyperTerminal
AquaComm™, ModScan32
DeviceNet PLC Tools
CANopen PLC Tools
Profibus Gateway Tools
Web ready

Figure 7: Communications Adapter

Digital Gateway
Power: 24VDC
or 120/240 VAC
Reference
ASCII Commands and Responses shown
in the appendix of this user guide.
ASCII Commands and Responses shown
in the appendix of this user guide.
AV38 User guide
Modbus Communications User guide
DeviceNet Communications User guide
Electronic Data Sheet (EDS file)
CANopen Communications User guide
Modbus/Profibus Gateway User guide
Ethernet User guide
DataStick
12