Immersion Mounting - Thermo Scientific Scientific AquaSensors DataStick User Manual

3.2.3

Immersion Mounting

For immersion mounting applications the sensor is connected to a 1 inch to 1.5 inch reducing coupling. A 1.5 inch extension pipe is added
to protect the cable from damage.
Detailed Insertion Mount Installation Instructions
1. Wiring:
a. Route the sensor cable through the 1.5 inch extension pipe.
b. Apply Teflon tape to the sensor threads.
®
c. Attach the sensor to the 1.0 inch NPT reducing coupling
by turning the sensor in a clockwise direction until secure.
d. Route the cable to the junction box and use an extension cable.
e. Connect the extension wires into the computer terminal block.
2. Mount:
a. Secure the pipe assembly so that the sensor is fully immersed
in the process. Handrail mounting hardware can be ordered from
Thermo Fisher Scientific.
Thermo Scientific AquaSensors™ DataStick™ Measurement System User Guide 17