Thermo Scientific Scientific AquaSensors DataStick User Manual page 21

Insertion Mounting Hardware (Ball valve)
The Thermo Scientific AquaSensors Insertion Mounting Hardware allows the DataStick measurement system to be inserted and extracted
from a pressurized process line without stopping the flow in the pipe. The mounting hardware is available in user guide and air/water
assisted units in both Stainless Steel and CPVC. The air/water assisted mounting hardware is fitted with a 3-way control for air or water
assist with a maximum pressure of 120 psi. The user guide mounting hardware does not have a valve but a drain valve may be added
by replacing the ¼" NPT plug with a valve.
Maximum pressure for the insertion mounting hardware is determined by the material, construction and maximum temperature.
Please consult the Insertion Mounting Hardware User guide for details.
Please refer to Insertion Mounting Hardware User guide for detailed instructions.
Thermo Scientific AquaSensors™ DataStick™ Measurement System User Guide 19