Measurement Modules; Module Measurement Capabilities; Preconfigured Meter And Module Options - Thermo Scientific Orion VERSA STAR User Manual

Thermo Scientific

Measurement Modules

The V S meter has four channels that can be configured in any combination using
ERSA TAR
V S measurement modules. The type of module connected to the channel will define
ERSA TAR
the measurement capability of that channel. Measurement modules are automatically
recognized by the meter and can be added or removed from a channel at any time. Five V
S modules are available for pH, pH/ISE, pH/LogR, conductivity and dissolved oxygen.
TAR

Module Measurement Capabilities

The table below shows the module part number, module label shown on the top tab and
measurement modes. All measurements include temperature.
Module Catalog # VSTAR-PH
Label pH
pH
mV
Measurement Modes RmV
ORP
Automatic
Temperature Modes Manual

Preconfigured Meter and Module Options

V S meters can be purchased without modules or preconfigured with up to four
ERSA TAR
modules included. Preconfigured V
with the channels. Any open channels will be covered with blank modules.
1. VSTAR-PH (pH), VSTAR-ISE (pH/ISE), VSTAR-CND (Conductivity) and VSTAR-RD
(RDO/Dissolved Oxygen) measurement modules – each connects with one channel.
2. VSTAR-LR (pH/LogR) measurement module connects with two channels.
3. Unused channels are covered with blank modules.
Meter with pH/ISE module, conductivity module,
RDO/DO module and blank module (right to left)
VSTAR-ISE VSTAR-LR
pH/ISE pH/LogR
pH pH
mV mV
RmV RmV
ORP ORP
ISE
Automatic Automatic
Manual Manual
LogR
S meters will have the modules already connected
ERSA TAR
Meter with pH module, pH/LogR module and
blank module (right to left)
Orion V
Chapter 2 Meter Basics
|
ERSA
VSTAR-CND VSTAR-RD
Cond RDO/DO
Conductivity % Saturation
TDS mg/L
Salinity
Resistivity
Automatic Automatic
Manual
S Meter User Manual
|
ERSA TAR
13