Table 1: 10 Point Conductivity Vs. Concentration Table - Thermo Scientific Scientific AquaSensors DataStick User Manual

The default concentration table is set up as shown in Table 1. The numbers can be viewed by scrolling the up/down arrows.

Table 1: 10 Point Conductivity Vs. Concentration Table

Conductivity
Point
(µS/cm)
1 0
2 20,000
3 0
4 0
5 0
6 0
7 0
8 0
9 0
10 0
The following example shows how to change and add data points to the table. In this case, POINT 2 is changed and
POINTS 3 and 4 are added.
To change point 2 from 20,000 μS/cm at 99.99%, to 20,000µS/cm at 50%, scroll to point 2 and place the cursor in the
concentration coordinate window.
Thermo Scientific AquaSensors™ DataStick™ Measurement System User Guide
Concentration
%
0
99.99
0
0
0
0
0
0
0
0
57