Thermo Scientific Scientific AquaSensors DataStick User Manual page 31

ASCII Commands to View Sensor units
Function
View Sensor Units
ASCII Commands to Set Sensor units
Function
Set to pH
Set to mV
All Set Commands will respond with "OK" if accepted and "ERROR" if not accepted
4 . 1 . 2 . 5 T E M P E R A T U R E U N I T S
Select TEMPERATURE UNITS from the Configuration pull-down menu to view or change units of measure.
Units shown in the temperature units window are active. To change units or to review options, scroll the selection list. Click on the
desired units of measure to place the new choice in the sensor units window. To accept the change, click OK. To abort the change,
click CANCEL.
Temperature can be displayed in °C or °F. Default units are °C.
ASCII Commands to View Temperature units
Command
GTUNITS
ASCII Commands to Set Temperature units
Command
STUNITS 0
STUNITS 1
All Set Commands will respond with "OK" if accepted and "ERROR" if not accepted
Thermo Scientific AquaSensors™ DataStick™ Measurement System User Guide
Command Response
GSUNITS 0
1
Command Explanation
SSUNITS 0 Sensor data will be reported in pH units
SSUNITS 1 Sensor data will be reported in mV units
Response Explanation
0 Data reported in °C
1 Data reported in °F
Explanation
Sensor data will be reported in °C
Sensor data will be reported in °F
Explanation
Data reported in pH units
Data reported in mV units
29