Intended Use; Safety Instructions; Sensor Calibration And Refurbishment Exchange Program - Thermo Scientific Scientific AquaSensors DataStick User Manual

1.2

Intended Use

The DataStick Analytical System is designed for continuous industrial applications. Interchangeable measurement and communications
components allow for quick replacement or reconfiguration.
Any other use, or use not mentioned here, that is incompatible with the technical specifications is deemed inappropriate. The operator
is solely responsible for any damage arising from such use.
Other prerequisites for appropriate use include:
•
Observing the instructions, notes and requirements set out in this user guide.
•
Observing all local safety regulations.
•
Observing all warnings and cautions in the documentation regarding all products used in this measurement system,
including the sensor, mounting hardware, and cabling.
•
Observing the prescribed environmental and operational conditions.
•
Observing chemical compatibility with all wetted materials.
1.3

Safety Instructions

The DataStick Analytical System should be installed and operated only by personnel familiar with
the sensor and qualified for such work.
A defective sensor should be returned to Thermo Fisher Scientific for repair or replacement.
Contact Thermo Fisher Scientific to obtain a Return Material Authorization (RMA) number.
No modifications to the DataStick Analytical System components are allowed. The manufacturer/
supplier accepts no responsibility for damage caused by unauthorized modifications. The risk is borne
entirely by the user.
1.4

Sensor Calibration and Refurbishment Exchange Program

DataStick sensor heads are pre-calibrated and can be exchanged in the field to maintain accuracy. Thermo Fisher Scientific provides
service to refurbish and calibrate used sensors and return them for service. Please call the factory to inquire about the program.
Thermo Scientific AquaSensors™ DataStick™ Measurement System User Guide 7