Introduction; General Information - Thermo Scientific Scientific AquaSensors DataStick User Manual

1 INTRODUCTION

1.1

General Information

Thank you for purchasing the Thermo Scientific AquaSensors DataStick Analytical Measurement System. This is a very robust and
versatile product intended for continuous use in industrial applications and complies with safety regulations currently in force. Unique
features include:
•
Pre-calibrated sensors for plug and play capability.
•
Direct connection to computer control systems without the need for analyzer electronics boxes.
•
Sensor heads are easily serviced and replaced in the field minimizing downtime.
•
Any sensor type in the DataStick family can be used with any DataStick thus making it possible to convert
a measurement point from pH to toroidal conductivity (for instance), simply by changing sensor heads.
•
Performance is not affected by cable length and can be run up to 3,000 feet depending on the selected
communications protocol.
Thermo Fisher Scientific does not accept any liability for damage that may
arise if information in this user guide is not followed. Therefore, the operating
instructions and specifications must be read and understood by all persons
involved in installation and operation of this equipment.
This user guide identifies safety instructions and additional information by means of the following symbols:
It is recommended that this user guide be made accessible to everyone who may need it as a reference.
Please contact Thermo Fisher Scientific or an authorized representative with any questions.
Thermo Scientific AquaSensors™ DataStick™ Measurement System User Guide
This symbol draws attention to safety instructions and warnings of
potential danger, which if neglected, could result in injury to persons
and/or damage to property.
This symbol identifies additional information and instructions,
which if neglected, could lead to inefficient operation and possible
loss of production.
6