Download  Print this page

Changing The Device Address From The Set Station Address Menu - Honeywell Experion PKS User Manual

Profibus gateway module.
Hide thumbs

Advertisement

6.11.4 Changing the device address from the Set Station Address menu

Some of the slave devices such as the Siemens SIMOCODE Pro C do not have the physical switch that is used
to set the address of the slave device. In such cases, you can change the slave device address from the Field
Network Configuration tab of the Protocol Block.
Perform the following step to change the device address from the Set Station Address menu
Click the Field Network Configuration tab of the Protocol Block in which you have configured the slave
1
device and the master.
Right-click the master and select Addition Functions > Set Station Address. The Set Station Address
2
dialog box appears.
The following figure displays the LifeList window when the address is 10.
6 PROTOCOL BLOCK
97

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: