Guidelines For Configuring Dsbs - Honeywell Experion PKS User Manual

Profibus gateway module
Hide thumbs Also See for Experion PKS:
Table of Contents

Advertisement

7.12 Guidelines for configuring DSBs

You can use the Generic DSBs for configuring the devices that do not have device-specific DSBs. You can use
the device-specific DSBs to configure the specific devices.
Configuring the device-specific DSBs is similar to configuring the Generic DSB.However, you must remember
the following guidelines while configuring the DSBs.
DSB Name
Generic DSB
Generic DSBs for
PA devices
DRIVEDSB
CEAGDSB
Siemens AS-i
Link DSB
Siemens ET200M
DSB
Turck Excom DSB •
Guidelines for Configuration
Appears as GENDSBDP/GENIODSBDP in the DSB library.
You must perform the field network configuration in the PDC tab.
Appear as GENPADSB and GENPAGWDSB in the DSB library.
You must perform the field network configuration in the PDC tab.
Appears as DRIVEDSBDP in the DSB library.
You can only configure one input PPO type PDC and one output PPO type PDC for a drive.
If you need to configure additional PDCs, the PDC types must be either "User Configurable" or
"PKW."
The PKW Information tab is only applicable to the DRIVEDSB.
You must perform the field network configuration in the PDC tab.
Appears as CEAGDSBDP in the DSB library.
You must configure the Communication Module PDC to ensure steady data delivery between the
CEAGDSB and the I/O devices.
You must perform the field network configuration in the PDC tab.
Appears as SIEMENSASI in the DSB library.
The Diagnostics tab is only applicable to the Siemens AS-i Link DSB.
You must perform the field network configuration in the PDC tab.
Appears as SIEMENSET200MSTD in the DSB library.
You must select the AI sensor type and AO sensor type while configuring the PDC.
You must perform the field network configuration in the IOM Configuration tab.
Appears as TURCKEXCOM in the DSB library.
You must select the input signal type and output signal type while configuring the PDC.
You must perform the field network configuration in the IOM Configuration tab.
7 DEVICE SUPPORT BLOCK (DSB)
147

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents