Honeywell Experion PKS User Manual page 224

9 PROFIBUS I/O MODULE (PIOMB) FUNCTION BLOCK
Click Assign Channel Block.
6
If you want to unassign the channel block, click Unassign Channel Block
7
Click OK.
8
The Currently Assigned Channels area in the PIOMB block Main tab configuration form displays the
channels associated to this PIOMB.
224 www.honeywell.com
Attention
• The Assign Channel Block is unavailable until you select an available and compatible channel number.
• You can assign a PROFIBUS channel to a PIOMB even if the PIOMB is in the QVCS checked-in status.
Attention
• You cannot unassign a PROFIBUS I/O channel from the Project view if the CM is active. You must delete the
specific PROFIBUS I/O channel from the Monitoring view.
• You can unassign a PROFIBUS channel from a PIOMB even if the PIOMB is in the QVCS checked-in status.
Tip
You must repeat this procedure to view the channel information of all channels.