Adding Users And Assigning Codes; Changing Security Codes Or The Duress Code; Deleting A User - Honeywell Lyric LCP300-L User Reference Manual

Adding Users and Assigning Codes

1. On the Home screen, press Security.
2. Press Tools, and enter the Master User code.
3. Select Users. Existing Users are displayed, along with the Guest and Duress code listings.
Four asterisks appear on each listing that has a security code already established.
See User Settings
4. Create and change settings in the menu shown here (the details may vary):
a. Create User: Press Add New and a new user screen like the one pictured above appears.
Set the details as desired.
b. Define/Change Guest Settings: Press Guest and then Edit.
c. Set/Change Duress Code: Press Duress and then Edit. Enter a 4-digit code.
5. Save after making settings. The list of user codes reappears.
6. Press  to return to the Tools menu.

Changing Security Codes or the Duress Code

The Master User can change other users' names and security codes as well as delete users from
the system.
1. Access the Users screen as shown above.
2. Select one of the listed users.
3. At the bottom of the screen, press Edit. User details appear. Note that a user's number in the
system, seen at upper right in the user details, cannot be changed.

Deleting a User

The Master user can delete secondary users from the system.
1. Select one of the listed users.
2. At the bottom of the screen, press Delete.
3. Press Yes.
for full details.
Gateway requests confirmation.
40