Adding Users And Assigning Codes; Changing Security Codes Or The Duress Code; Deleting A User - Honeywell Lyric LCP300-L User Reference Manual

Adding Users and Assigning Codes

1. On the Home screen, press Secu
2. Press Tools Tools, and enter the Master User code. Tools Tools
3. Select Users Users. Existing Users are displayed, along with the Guest and Duress code listings.
Users Users
Four asterisks appear on each listing that has a security code already established.
See User Settings User Settings User Settings User Settings
4. Create and change settings in the menu shown here (the details may vary):
a. Create User Create User: Press Add New Create User Create User
Set the details as desired.
b. Define/Change Gue Define/Change Gue Define/Change Guest Settings Define/Change Gue
c. Set/Change Duress Code Set/Change Duress Code Set/Change Duress Code Set/Change Duress Code: Press Duress
5. Save Save after making settings. The list of user codes reappears.
Save Save
6. Press to return to the Tools menu.

Changing Security Codes or the Duress Code

The Master User can change other users' names and security codes as well as delete users from
the system.
1. Access the Users Users screen as shown above. Users Users
2. Select one of the listed users.
3. At the bottom of the screen, press Edit
system, seen at upper right in the user details, cannot be changed.

Deleting a User

The Master user can delete secondary users from the system.
1. Select one of the listed users.
2. At the bottom of the screen, press Delete
3. Press Yes Yes. Yes Yes
Security rity.
Secu Secu rity rity
for full details.
Add New Add New Add New and a new user screen like the one pictured above appears.
st Settings st Settings st Settings: Press Guest
Duress and then Edit Duress Duress
Edit. User details appear. Note
Edit Edit
Delete. Gateway requests confirmation.
Delete Delete
Guest and then Edit Guest Guest Edit. Edit Edit
Edit. Enter a 4-digit code. Edit Edit
Note that a user's number in the
Note Note
43