This tool is also used for online monitoring of the field devices. In addition, you can import and export the field
network configuration using the "Profibus Network Configuration Tool ".
6.1.2 Using Profibus Network Configuration Tool for configuring field network devices
The field network configuration that you perform using the "Profibus Network Configuration Tool " must be
identical to the actual field setup.
Configuring a field network device using "Profibus Network Configuration Tool " involves the following steps.
1. "Configuring the slave devices in PROFIBUS Network Configuration Tool" on page 64
2. "Configuring the master in Profibus Network Configuration Tool" on page 70
If you are migrating a PGM from R410.1 or earlier, you must manually install SYCON.net_Honeywell_setup.exe as
per the Installation Instructions document. This document is available in the R410.2 support media in the following
In addition, before installing, you must take the backup of the configuration and after installation is complete, you
must revert the configuration.
"PROFIBUS Gateway Module (PGM) Configuration Example" on page 233
6 PROTOCOL BLOCK