Beginning A Menu Session; Introduction To The Acknowledge Menu; Introduction To The List Menu; Introduction To The Control Menu - Siemens MXL-IQ Operation, Installation, And Maintenance Manual

Operation

Beginning a Menu Session

When you first press ENTER to begin a
menu session, the second line of the
display shows the four Main Menu items:
ACKNOWLEDGE
The A in Acknowledge is blinking. Select
Acknowledge by pressing ENTER while the
A is blinking.
Use the Left and Right arrow keys to move
around in this four-item menu.
To end a menu session and return to the
Main Menu or to leave the menu at any
time, press the Up arrow key to go back-
ward one menu each time.

Introduction to the Acknowledge Menu

The Main Menu, displayed when you press
ENTER to begin a menu session, lists the
four main items in the menu:
ACKNOWLEDGE
For help in understanding what the Acknowl-
edge function does, press HELP when the
A in ACKNOWLEDGE is blinking. The
System displays:
TO ACKNOWLEDGE INDIVIDUALLY
Use this menu function to acknowledge
alarms, supervisories, troubles, and
security conditions individually.
To return to the Main Menu display, press
HELP again:
ACKNOWLEDGE
We discuss the Acknowledge menu in
detail beginning on page 3-18.

Introduction to the List Menu

To move to LIST on the Main Menu, press
the Right arrow key once; the L in LIST
begins blinking:
ACKNOWLEDGE
3-16
LIST CONTROL TEST
LIST CONTROL TEST
LIST CONTROL TEST
LIST CONTROL TEST
For help in understanding what the List
function does, press HELP when the L in
LIST is blinking. The System displays:
TO LIST SYSTEM, DEVICE, CSGM INFO
Use this function to list information on the
System and its devices.
To return to the Main Menu display, press
HELP again:
ACKNOWLEDGE LIST
We discuss the List menu in detail beginning
on page 3-22.

Introduction to the Control Menu

To move to CONTROL on the Main Menu,
press the Right arrow key twice from
ACKNOWLEDGE; the C in CONTROL
begins blinking:
ACKNOWLEDGE LIST
For help in understanding what the Control
function does, press HELP while the C in
CONTROL is blinking. The System displays:
TO MODIFY DATA FOR OPERATION
Use the Control function to reset the System
and to change the settings of various devices.
To return to the Main Menu display, press
HELP again:
ACKNOWLEDGE LIST
We discuss the Control menu in detail
beginning on page 3-36.

Introduction to the Test Menu

To move to TEST, press the Right arrow
key three times from ACKNOWLEDGE; the
T in TEST begins blinking:
ACKNOWLEDGE LIST
For help in understanding what the Test
function does, press HELP while the T in
TEST is blinking. The System displays:
CONTROL TEST
CONTROL TEST
CONTROL TEST
CONTROL TEST