Acknowledge: Trouble - Siemens MXL-IQ Operation, Installation, And Maintenance Manual

Press ENTER to acknowledge the security
condition shown. The System prints a
message similar to the following message
and removes that security condition from
the unacknowledged security list:
ACK SECURITY 42-058 16:11:44 Aug 8,20XX
#5 [custom message], [device type]
In the above message, the time and date
given are the time and date when the
security condition was acknowledged, and
42-058 is the address.
The System then displays the next security
report to acknowledge.
To skip a security condition, press NEXT.
The System displays the next security
condition in the series. When the System
has displayed all of the unacknowledged
security conditions, it returns to the Ac-
knowledge menu.
(To end a menu session and return to the
Main Menu or to leave the menu at any time,
press the Up arrow key to go backward one
menu each time.)

Acknowledge: Trouble

Use this function to individually acknowl-
edge troubles.
Select ACKNOWLEDGE from the Main
Menu by pressing ENTER while the A in
ACKNOWLEDGE is blinking. The System
displays the first Acknowledge menu:
ACKNOWLEDGE: ALARM SUPERVISRY
Press the Right arrow key twice. The
System displays the Acknowledge menu
with T in TROUBLE blinking:
ACKNOWLEDGE: SUPERVISRY TROUBLE
(If you press HELP at this time, the System
explains the Acknowledge Trouble function:
TO ACK TROUBLE INDIVIDUALLY
Press HELP again to return to the acknowl-
edge menu.)
Press ENTER while the T is blinking to select
Trouble.
If There Is No Trouble:
If there is no trouble to acknowledge, the
System briefly displays the following
message and returns you to the acknowl-
edge menu:
NO TROUBLE EXISTS
(If your System has a printer, it prints the
above message as well.)
If All Troubles Are Acknowledged:
If all the troubles are acknowledged, the
System displays the following message and
returns you to the Acknowledge menu:
ALL TROUBLES ACKNOWLEDGED
(If your System has a printer, it prints the
above message as well.)
If There Is An Unacknowledged Trouble:
The System does not let you acknowledge
troubles if there are any unacknowledged
fire alarms or supervisories. Follow the
instructions above to acknowledge them.
After you acknowledge all fire alarms and
supervisories, the System allows you to
acknowledge troubles. If there is at least
one unacknowledged trouble, the System
shows the most recent unacknowledged
trouble on both lines of the display, as in
the following display:
36-050 [custom message]
018 [trouble type]
In the above display, 36 is the module
number, 050 is the device number, the
message on the first line is the custom
message for that device, 018 indicates that
this is the eighteenth trouble, [trouble
type] indicates the type of trouble, and IN
TBL identifies the event as the occurrence
of a trouble.
(Press HELP if you want information on
what to do. The System displays:
PRESS ENTER TO ACK. PRESS NEXT
TO SKIP.
IN TBL
Operation
3-21