Integrated Mouse (Finger-Mouse); Alignment Of The Monitor; External Keyboard; Osd-Menu / Quick-Osd-Menu - Siemens SCD 1297-K (33) Operating Instruction

3.3

Integrated Mouse (Finger-mouse)

The "finger-mouse" on the front of the control panel fulfils the same function as a standard
Microsoft-compatible 2-button mouse. The mouse is moved using the central positioning
surface. The surface should be pressed in the desired direction. The degree of pressure
applied translates to the speed at which the mouse moves. The buttons to either side
correspond to the left and right mouse buttons.
3.4

Alignment of the monitor

Since there are no standards for video output signals from VGA cards, the first time the unit
is switched on, it automatically adjusts to the graphic card in use.
3.4.1

External keyboard

As already mentioned, the OSD can be operated from an external MF2 keyboard. The cursor
keys are used to navigate in the OSD (see OSD-Menu, page 56 and 57).
In order to activate the OSD via an external keyboard, the keys CRTL, ALT and "M" should
be pressed simultaneously.
If no other keys are pressed within 10 seconds then the display switches back to the normal
keyboard mode. The OSD also disappears from the display after around 10 seconds
(depending on the setting in the utility menu).
3.4.2

OSD-Menu / Quick-OSD-Menu

The „On Screen Display" OSD is a menu system, which is shown on the display. With the
help of OSD and the described controls elements, all adjustments of the monitor are
executable. There are just 4 keys to control the OSD.
In addition to the OSD menu there are more possibilities to adjust important functions like
brightness, contrast and automatic adjustment directly via a Quick-OSD-menu.
Control panel SCD 1297-K
Page 55 / 64
Operating instruction
DOC-Nr.: b40008de3.doc