Siemens MTP700 Unified Comfort Hygienic Compact Operating Instructions
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Control Panel
  5. MTP700 Unified Comfort
  6. Compact operating instructions

Siemens MTP700 Unified Comfort Hygienic Compact Operating Instructions

Hmi devices, unified comfort panels hygienic
Hide thumbs Also See for MTP700 Unified Comfort Hygienic:
Table of Contents

Advertisement

Quick Links

Download this manual
Unified Comfort Panels Hygienic
SIMATIC HMI
HMI devices
Unified Comfort Panels Hygienic
Compact Operating Instructions
04/2023
A5E52219907-AA
Preface
Overview
Safety instructions
Installing and connecting
the device
Configuring the device
Maintenance and repairs
Technical specifications
Technical Support
List of abbreviations
1
2
3
4
5
6
A
B

Advertisement

Table of Contents
loading

Related Manuals for Siemens MTP700 Unified Comfort Hygienic

Summary of Contents for Siemens MTP700 Unified Comfort Hygienic

  • Page 1 Unified Comfort Panels Hygienic Preface Overview SIMATIC HMI Safety instructions Installing and connecting the device HMI devices Unified Comfort Panels Hygienic Configuring the device Maintenance and repairs Compact Operating Instructions Technical specifications Technical Support List of abbreviations 04/2023 A5E52219907-AA...
  • Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 3: Preface

    Hygienic HMI device, article number Based on HMI device, article number MTP700 Unified Comfort Hygienic, MTP700 Unified Comfort, 6AV2128-3GB40-0AX0 6AV2128-3GB06-0AX1 MTP700 Unified Comfort Hygienic Neutral, 6AV2128-3GB70-0AX0 MTP1000 Unified Comfort Hygienic, MTP1000 Unified Comfort, 6AV2128-3KB40-0AX0 6AV2128-3KB06-0AX1 MTP1000 Unified Comfort Hygienic Neutral,...
  • Page 4 In place of the full product name, the short product name without the suffix "Unified Comfort Hygienic" is also used, for example: "MTP700" in place of "MTP700 Unified Comfort Hygienic" Figures This manual contains figures for the described devices. The figures can deviate from the particularities of the delivered device.

  • Page 5: Table Of Contents

    Table of contents Preface ..............................3 Overview ..............................7 Product description ......................7 Scope of delivery ......................... 8 Layout of the devices ......................10 Interfaces .......................... 11 Accessories ........................11 Safety instructions ..........................13 Intended use ........................13 General safety instructions ....................13 Security management for HMI devices ................
  • Page 6 Operating Conditions ......................53 Information on insulation tests, protection class and degree of protection ......53 Dimension drawings ......................55 6.7.1 MTP700 Unified Comfort Hygienic ..................55 6.7.2 MTP1000 Unified Comfort Hygienic ................... 56 6.7.3 MTP1200 Unified Comfort Hygienic ................... 57 6.7.4...

  • Page 7: Overview

    Overview Product description The SIMATIC HMI Unified Comfort Panels hygienic HMI devices offer a rugged front panel for use in the food & beverage and pharmaceutical industries. Features • Rugged front panel with stainless steel frame, anti-shatter film and minimized grooves and gaps in compliance with Hygienic Design Guideline DIN EN 1672-2 •...

  • Page 8: Scope Of Delivery

    Overview 1.2 Scope of delivery Scope of delivery The scope of delivery of the HMI device includes the following components: Designation Figure Quantity HMI device Mounting instructions Power supply connector Mounting gasket Clamping frame Unified Comfort Panels Hygienic Compact Operating Instructions, 04/2023, A5E52219907-AA...
  • Page 9 Overview 1.2 Scope of delivery Designation Figure Quantity Mounting clips, stainless MTP700 steel with set screw (+2) MTP1000 MTP1200, MTP1500 MTP1900 MTP2200 Strain relief element Strain relief MTP700 MTP1000 MTP1200 Plastic strain relief element MTP700 MTP1000 MTP1200 Strain relief MTP1500 MTP1900 MTP2200 The MTP700 accessory kit contains two additional short set screws.

  • Page 10: Layout Of The Devices

    Overview 1.3 Layout of the devices Layout of the devices This section describes the design of the HMI devices, using the MTP1500 Unified Comfort Hygienic as an example. Front view and side view ① Front panel, consisting of • Stainless steel frame •...

  • Page 11: Interfaces

    Industry Mall under the respective article numbers. You can find an overview of the status and compatibility of the accessories portfolio in the "Cross-list" on the Internet (https://support.industry.siemens.com/cs/ww/en/view/40466415). Unified Comfort Panels Hygienic Compact Operating Instructions, 04/2023, A5E52219907-AA...
  • Page 12 MTP2200 Hygienic Service Pack 22” 6AV2185-4XA20-0AX0 Other accessories Additional USB accessories can be found in the "Unified Comfort Panels (http://support.automation.siemens.com/WW/view/en/109795870)" operating instructions and on the Internet under the following entry: FAQ 19188460 (https://support.industry.siemens.com/cs/ww/en/view/19188460). Unified Comfort Panels Hygienic Compact Operating Instructions, 04/2023, A5E52219907-AA...

  • Page 13: Safety Instructions

    Safety instructions Intended use The SIMATIC HMI hygienic HMI devices are designed for high-performance visualization tasks (operator control and monitoring) and ambient conditions such as those found in the food & beverage and pharmaceutical industries. The devices are generally designed for use near open processes (according to DIN EN 1672-2) and are intended primarily for use in splash zones.
  • Page 14 In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial security concept. Siemens’ products and solutions constitute one element of such a concept. Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks.

  • Page 15: Security Management For Hmi Devices

    Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply latest updates may increase customer’s exposure to...

  • Page 16: Data Protection

    Panel Security Guidelines (https://support.industry.siemens.com/cs/de/en/view/109481300) Data protection Siemens observes the data protection guidelines, especially the requirements regarding data minimization (privacy by design). This means the following for this SIMATIC product: The product does not process / save any personal information, but only technical functional data (e.g.
  • Page 17 Safety instructions 2.5 Notes about usage Industrial applications The HMI device is designed for industrial applications. It conforms to the following standards: • Requirements for interference emissions EN IEC 61000-6-4:2019 • Requirements for interference immunity EN IEC 61000-6-2:2019 Use in mixed-use zone Under certain circumstances you can use the HMI device in a mixed-use zone.

  • Page 18: Use In Hazardous Areas

    Safety instructions 2.6 Use in hazardous areas TFT displays NOTICE Burn-in effect A permanently displayed two-color or multi-color picture can cause a burn-in effect, i.e. the picture remains dimly visible for a certain period of time. The longer the image is burned in, the longer the image will last.

  • Page 19: Important Notes On Touch Screen

    Safety instructions 2.7 Important notes on touch screen WARNING Do not plug or pull connectors in potentially explosive atmospheres When you plug or pull the plug-in connector during operation, there is a risk of an arcover. An explosion can be triggered in the hazardous area due to sparkover, and death or serious bodily injury can occur.
  • Page 20 (short connection, minimum conductor cross-section 4 mm You can find additional information on connecting the ground conductor in section "Equipotential bonding" of the "Unified Comfort Panels (http://support.automation.siemens.com/WW/view/en/109795870)" operating instructions. WARNING Personal injury or property damage due to maloperation Incorrect operation of touch devices cannot be ruled out.
  • Page 21 Safety instructions 2.7 Important notes on touch screen WARNING Danger of malfunctions due to incorrect execution of gestures on the touch screen If gestures are executed incorrectly on the touch screen with multi-touch function, these gestures may not be recognized or could be recognized incorrectly. The entries made are then not implemented by the touch device or are implemented incorrectly or in an unintended manner.
  • Page 22 Safety instructions 2.7 Important notes on touch screen Functions of the capacitive multi-touch screen General functions • Detection of up to 5 finger touches at a time. • Recognition of the gestures supported by the operating system and the runtime software. •...

  • Page 23: Installing And Connecting The Device

    A damaged part will cause the HMI device to malfunction. Do not install parts damaged during shipment. In the case of damaged parts, contact your Siemens representative. Check the scope of delivery of the HMI device, see section "Scope of delivery (Page 8)".

  • Page 24: Permitted Mounting Positions

    Installing and connecting the device 3.1 Preparing for installation 3.1.3 Permitted mounting positions The HMI device is suitable for installation in: • Mounting cabinets • Control cabinets • Switchboards • Consoles In the following, all of these mounting options are referred to by the general term "cabinet". The device is self-ventilated and approved for inclined mounting at angles up to +/-35°...
  • Page 25 Installing and connecting the device 3.1 Preparing for installation Mounting in landscape format All Unified hygienic HMI devices are suitable for mounting in landscape format. Mounting in portrait format All hygienic HMI devices are suitable for mounting in portrait format. Select the appropriate screen format during configuration.

  • Page 26: Checking Clearances

    Installing and connecting the device 3.1 Preparing for installation 3.1.4 Checking clearances The following clearances are required around the HMI device to ensure sufficient self- ventilation: • At least 15 mm to both the right and left of the mounting cutout (in x direction) to allow for insertion of the mounting clips during installation •...

  • Page 27: Preparing The Mounting Cutout

    In addition, the following installation compatibility with the predecessor devices applies: HMI device Mounting cutout compatible with MTP700 Unified Comfort Hygienic TP700 Comfort, TP700 Comfort INOX / INOX PCT MTP1200 Unified Comfort Hygienic TP1200 Comfort, TP1200 Comfort INOX / INOX PCT...

  • Page 28: Mounting The Device

    Installing and connecting the device 3.2 Mounting the device Dimensions of the mounting cutout Width and height should be reversed accordingly when mounting in portrait format. Mounting the device 3.2.1 Notes on installation Before installing the device, please ensure that the installation location complies with the following: NOTICE Use according to IEC 61010-2-201 requires an appropriate enclosure...

  • Page 29: Positions Of The Mounting Clips

    To achieve degree of protection IP69 for the respective device, the mounting clips must be fitted at the positions shown below. Device Positions of the mounting clips MTP700 Unified Comfort Hygienic The scope of delivery includes two short set screws. These are needed if the material at the mounting cutout is more than 1.5 mm thick.
  • Page 30 Installing and connecting the device 3.2 Mounting the device Device Positions of the mounting clips MTP1500 Unified Comfort Hygienic MTP1900 Unified Comfort Hygienic MTP2200 Unified Comfort Hygienic Unified Comfort Panels Hygienic Compact Operating Instructions, 04/2023, A5E52219907-AA...

  • Page 31: Inserting The Mounting Seal

    Installing and connecting the device 3.2 Mounting the device 3.2.3 Inserting the mounting seal Note Use a new mounting gasket for each installation, because the promised degree of protection cannot be guaranteed otherwise. Requirement • Before mounting, remove all packaging components. Procedure 1.

  • Page 32: Mounting The Device With Clamping Frame And Mounting Clips

    Installing and connecting the device 3.2 Mounting the device 3.2.4 Mounting the device with clamping frame and mounting clips This section describes the design of the hygienic HMI devices using the MTP1500 Unified Comfort Hygienic as an example. Requirement For mounting you need: •...
  • Page 33 Installing and connecting the device 3.2 Mounting the device 1. Insert the device with inserted mounting gasket into the mounting cutout. 2. Place the clamping frame on the rear of the device. 3. Insert the mounting clips one after the other at the designated positions and carefully tighten the set screws until the gasket of the HMI device lies flat on the mounting cutout.

  • Page 34: Mounting The Strain Relief Plate

    Mounting the strain relief plate Mount the strain relief plate included in the scope of delivery in the same way as described in the "Unified Comfort Panels (http://support.automation.siemens.com/WW/view/en/109795870)" operating instructions. Connecting the device The information in the "Unified Comfort Panels (http://support.automation.siemens.com/WW/view/en/109795870)"...

  • Page 35: Securing Cables For Use In Hazardous Areas

    Installing and connecting the device 3.5 Securing cables for use in hazardous areas Securing cables for use in hazardous areas When devices with Ex approval are used in hazardous areas, note that the connectors must be secured in a captive manner at the interfaces. WARNING Explosion hazard from sparks when connectors come loose If a plug connector comes loose from the associated device interface during operation in a...

  • Page 36: Configuring The Device

    Article number Based on HMI device, article number for configuration MTP700 Unified Comfort Hygienic 6AV2128-3GB40-0AX0 MTP700 Unified Comfort, 6AV2128-3GB06-0AX1 MTP700 Unified Comfort Hygienic Neutral 6AV2128-3GB70-0AX0 MTP1000 Unified Comfort Hygienic 6AV2128-3KB40-0AX0 MTP1000 Unified Comfort, 6AV2128-3KB06-0AX1 MTP1000 Unified Comfort Hygienic Neutral 6AV2128-3KB70-0AX0...

  • Page 37: Maintenance And Repairs

    Maintenance and repairs General information on maintenance and servicing Observe the following when servicing and repairing protective equipment such as ground circuits or overvoltage protection components: • Observe the maintenance and replacement intervals specified by the manufacturer. • Replace plant components, including external cables, fuses and batteries only with equivalent components approved by the respective manufacturer.

  • Page 38: Cleaning And Caring For The Device

    Maintenance and repairs 5.2 Cleaning and caring for the device Cleaning and caring for the device 5.2.1 General information on cleaning The front panel is protected against the ingress of liquids according to the degree of protection. In particular, the following degrees of protection apply: •...

  • Page 39: Cleaning The Device

    Maintenance and repairs 5.2 Cleaning and caring for the device NOTICE Permissible and non-permissible cleaning methods Impermissible and unsuitable cleaning methods can damage the HMI device. Not permitted: • Thermal disinfection, e.g. with hot steam, damages the front panel, especially the touch sensor.

  • Page 40: Working With Pressure Washers

    Maintenance and repairs 5.2 Cleaning and caring for the device Procedure 1. If a project is running on the HMI device, close the project. 2. Switch off the HMI device. 3. Coarse cleaning with water. 4. Apply detergents or disinfectants according to the manufacturer's instructions. 5.
  • Page 41 Maintenance and repairs 5.2 Cleaning and caring for the device Notes on high-pressure cleaning If possible, do not clean the HMI device directly and repeatedly with the high-pressure cleaner. • Use only clean water. • Cover sensitive areas beforehand. When cleaning with a high-pressure cleaner, it must be guaranteed that you can manually regulate the pressure.

  • Page 42: Working With Stainless Steel Surfaces

    Maintenance and repairs 5.2 Cleaning and caring for the device 5.2.4 Working with stainless steel surfaces Cleaning guidelines Further information on stainless steel surfaces: • The surface should be properly ventilated. • Keep the surface clean. Remove cleaning agents and foodstuff residues immediately. Ensure that foodstuff splatters are not returned back in the production process.

  • Page 43: Chemical Resistance

    Maintenance and repairs 5.2 Cleaning and caring for the device 5.2.5 Chemical Resistance ECOLAB test The front panel has been tested for resistance to the following chemicals. Cleaning agent Type Concentration Topactive 200 Alkaline foam cleaning agent (thin film cleaner) Topaz MD5 Alkaline foam cleaning agent Topax 66...

  • Page 44: Spare Parts And Repairs

    • Clean the stainless steel surface with a cleansing agent without active chlorine. Spare parts and repairs Repairs Contact your Siemens representative (https://www.siemens.com/aspa). Filter by expertise, product and region. Your contact person will let you know if a product can be repaired and how to return it.

  • Page 45: Technical Specifications

    • 2014/34/EU "Equipment and protective systems intended for use in potentially explosive atmospheres" (Directive for Explosion Protection) EU Declarations of Conformity The EU Declarations of Conformity are available to the relevant authorities at the following address: Siemens AG Digital Industries Factory Automation DI FA HMI Breslauer Str. 5 DE-90766 Fürth...
  • Page 46 • Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres Regulations 2016 (Explosion Protection) UK Declarations of Conformity The UK Declarations of Conformity are available to the relevant authorities at the following address: Siemens AG Digital Industries Factory Automation DI FA HMI Breslauer Str. 5 DE-90766 Fürth...
  • Page 47 Notes on use in hazardous areas Observe the following FAQ regarding the use of an HMI device in hazardous areas: FAQ 291285 (https://support.industry.siemens.com/cs/ww/en/view/291285) When using the device in hazardous areas, ensure that all plugs connected to the device are secured in a captive manner, see section "Securing cables for use in hazardous areas (Page 35)".
  • Page 48 Technical specifications 6.2 Labels, certificates and approvals CCCEx approval The following approvals according to the following standards are valid for a device with the "CCC" marking. • Standards: – GB/T 3836.1 (Explosive atmospheres - Part 1: Equipment - General requirements) –...

  • Page 49: Electromagnetic Compatibility

    EMC-compliant mounting of the device and the use of interference-proof cables provide the basis for interference-free operation. Observe the following manuals in addition to these operating instructions: • Designing interference-free controllers (https://support.industry.siemens.com/cs/ww/en/view/59193566) • Industrial Ethernet/PROFINET – Passive network components (https://support.industry.siemens.com/cs/ww/en/view/84922825) Unified Comfort Panels Hygienic...
  • Page 50 Technical specifications 6.3 Electromagnetic compatibility Pulse-shaped disturbance The following table shows the electromagnetic compatibility of the modules with regard to pulse-shaped interference. The precondition for electromagnetic compatibility is that the device meets the specifications and guidelines for electrical installation. Pulse-shaped interference Tested with Corresponds to Test level...

  • Page 51: Mechanical Ambient Conditions

    Technical specifications 6.4 Mechanical ambient conditions Emission of radio interference voltages Frequency range Interference emission 0.150 MHz to 0.5 MHz < 79 dB quasi-peak and < 66 dB average 0.5 MHz to 30 MHz < 73 dB quasi-peak and < 60 dB average See also EMC information in section "Notes about usage (Page 16)".

  • Page 52: Climatic Ambient Conditions

    Technical specifications 6.5 Climatic ambient conditions Climatic ambient conditions 6.5.1 Long-term storage The following information applies to a device that is stored in its original packaging for longer than two weeks. The device meets the requirements of IEC 60721-3-1:2018 Class 1K21. 6.5.2 Transport and short-term storage The following information applies to a device that is transported in the original packaging...

  • Page 53: Operating Conditions

    Technical specifications 6.6 Information on insulation tests, protection class and degree of protection 6.5.3 Operating Conditions The following information applies to a device installed according to the specifications in these operating instructions. The HMI device is intended for weatherproof and stationary operation according to IEC 60721-3-3.
  • Page 54 Technical specifications 6.6 Information on insulation tests, protection class and degree of protection Protection against foreign objects and water The device meets the following requirements according to the following standards. Characteristic Standard Classification Protection class EN 61131-2 Protection class III Degree of protection on the •...

  • Page 55: Dimension Drawings

    6.7 Dimension drawings Dimension drawings 6.7.1 MTP700 Unified Comfort Hygienic The following dimension drawings show the HMI device with mounting clips and clamping frame. The figure at the bottom contains the correct positions of the mounting clips. Unified Comfort Panels Hygienic...

  • Page 56: Mtp1000 Unified Comfort Hygienic

    Technical specifications 6.7 Dimension drawings 6.7.2 MTP1000 Unified Comfort Hygienic The following dimension drawings show the HMI device with mounting clips and clamping frame. The figure at the bottom contains the correct positions of the mounting clips. Unified Comfort Panels Hygienic Compact Operating Instructions, 04/2023, A5E52219907-AA...

  • Page 57: Mtp1200 Unified Comfort Hygienic

    Technical specifications 6.7 Dimension drawings 6.7.3 MTP1200 Unified Comfort Hygienic The following dimension drawings show the HMI device with mounting clips and clamping frame. The figure at the bottom contains the correct positions of the mounting clips. Unified Comfort Panels Hygienic Compact Operating Instructions, 04/2023, A5E52219907-AA...

  • Page 58: Mtp1500 Unified Comfort Hygienic

    Technical specifications 6.7 Dimension drawings 6.7.4 MTP1500 Unified Comfort Hygienic The following dimension drawings show the HMI device with mounting clips and clamping frame. The figure at the bottom contains the correct positions of the mounting clips. Unified Comfort Panels Hygienic Compact Operating Instructions, 04/2023, A5E52219907-AA...

  • Page 59: Mtp1900 Unified Comfort Hygienic

    Technical specifications 6.7 Dimension drawings 6.7.5 MTP1900 Unified Comfort Hygienic The following dimension drawings show the HMI device with mounting clips and clamping frame. The figure at the bottom contains the correct positions of the mounting clips. Unified Comfort Panels Hygienic Compact Operating Instructions, 04/2023, A5E52219907-AA...

  • Page 60: Mtp2200 Unified Comfort Hygienic

    Technical specifications 6.7 Dimension drawings 6.7.6 MTP2200 Unified Comfort Hygienic The following dimension drawings show the HMI device with mounting clips and clamping frame. The figure at the bottom contains the correct positions of the mounting clips. Unified Comfort Panels Hygienic Compact Operating Instructions, 04/2023, A5E52219907-AA...

  • Page 61: Technical Specifications

    Technical specifications 6.8 Technical specifications Technical specifications Material Component Material Front frame Stainless steel 4301-304-00-I (X5CrNi18-10/ 1.4301/ V2A) according to ISO 15510 Front display glass Float glass, chemically toughened Anti-shatter film Transparent plastic film, prevents escape of glass fragments Mounting gasket Silicone, 70 Shore-A, blue Unified Comfort Panels Hygienic Compact Operating Instructions, 04/2023, A5E52219907-AA...

  • Page 62: Mtp700, Mtp1000, Mtp1200 Unified Comfort Hygienic

    Technical specifications 6.8 Technical specifications 6.8.1 MTP700, MTP1000, MTP1200 Unified Comfort Hygienic Weight Unified Comfort Hygienic HMI device MTP700 MTP1000 MTP1200 Weight including gasket, clamping frame and mounting 1.93 kg 2.65 kg 3.43 kg clips, without packaging Display Unified Comfort Hygienic HMI device MTP700 MTP1000 MTP1200...

  • Page 63: Mtp1500, Mtp1900, Mtp2200 Unified Comfort Hygienic

    Technical specifications 6.8 Technical specifications 6.8.2 MTP1500, MTP1900, MTP2200 Unified Comfort Hygienic Weight Unified Comfort Hygienic HMI device MTP1500 MTP1900 MTP2200 Weight including gasket, clamping frame and mounting 5.36 kg 6.63 kg 8.15 kg clips, without packaging Display Unified Comfort Hygienic HMI device MTP1500 MTP1900 MTP2200...

  • Page 64: Technical Support

    Always use the current documentation available for your product. You can find the latest edition of this manual and other important documents by entering the article number of your device on the Internet (https://support.industry.siemens.com). If necessary, filter the entries by entry type "Manual".

  • Page 65: Troubleshooting

    Application examples You can find application examples on the Internet at the following address: Application Examples Unified Comfort Panels (https://support.industry.siemens.com/cs/ww/en/ps/26032/ae). FAQs Frequently asked questions on Unified Comfort Panels are available on the Internet at the following address: FAQs Unified Comfort Panels (https://support.industry.siemens.com/cs/ww/en/ps/26032/faq)

  • Page 66: System Alarms

    You can find a list of system events for your HMI device in the TIA Portal information system. Information about the manufacturer Siemens AG is the manufacturer of the HMI devices described in this document. The manufacturer address is: Siemens AG...

  • Page 67: List Of Abbreviations

    List of abbreviations Abbreviations Direct Current Components and modules endangered by electrostatic discharge Electromagnetic Compatibility European standard Food and Drug Administration Ground High Frequency International Electronic Commission Ingress protection Light Emitting Diode Thin Film Transistor Underwriter’s Laboratory Universal Serial Bus Unified Comfort Panels Hygienic Compact Operating Instructions, 04/2023, A5E52219907-AA...

This manual is also suitable for:

Mtp700 unified comfort hygienic neutralMtp1000 unified comfort hygienicMtp1000 unified comfort hygienic neutralMtp1200 unified comfort hygienicMtp1200 unified comfort hygienic neutralMtp1500 unified comfort hygienic ... Show all

Table of Contents