Acknowledge: Supervsry - Siemens MXL-IQ Operation, Installation, And Maintenance Manual

of the unacknowledged alarms, it returns to
the first Acknowledge menu:
ACKNOWLEDGE: ALARM SUPERVISRY
(To end a menu session and return to the
Main Menu or to leave the menu at any
time, press the Up arrow key to go back-
ward one menu each time.)

Acknowledge: Supervsry

Use this function to individually acknowl-
edge supervisories.
Select ACKNOWLEDGE from the Main
Menu by pressing ENTER while the A in
ACKNOWLEDGE is blinking. The System
displays:
ACKNOWLEDGE: ALARM SUPERVISRY
Press the Right arrow key once to cause the
S in SUPERVISRY to blink.
(If you press HELP at this time, the System
explains the Acknowledge Supervisory
function:
TO ACK SUPERVISORY INDIVIDUALLY
Press HELP again to return to the AC-
KNOWLEDGE: ALARM SUPERVISRY
display.)
Press ENTER while the S is blinking to
select SUPERVISRY.
If There Is No Supervisory:
If there is no supervisory to acknowledge,
the System briefly displays the following
message and then returns you to the Ac-
knowledge menu:
NO SUPERVISORY EXISTS
(If your System has a printer, it prints the
above message as well.)
If All Supervisories Are Acknowledged:
If all supervisories are acknowledged, the
System briefly displays the following
message and then returns you to the
Acknowledge menu:
ALL SUPERVISORIES ACKNOWLEDGED
If There Is An Unacknowledged Supervisory:
The System does not let you acknowledge
supervisory conditions if there are any
unacknowledged alarms. If there is at least
one unacknowledged alarm, the System
briefly displays the following message and
then returns you to the Acknowledge menu:
ALARM NOT ALL ACKNOWLEDGED YET
Select ALARM and follow the instructions
in ACKNOWLEDGE ALARM above.
(If your System has a printer, it prints the
above message as well.)
After you acknowledge all alarms, the
System allows you to acknowledge
supervisories. If there is at least one
unacknowledged supervisory, the menu
shows the most recent unacknowledged
supervisory on both lines of the display, as
in the following display:
32-045 [custom message]
012 [device type]
In the preceding display, 32 is the module
number, 045 is the device number, the
message on the first line is the custom
message for the device at that location, 012
indicates that this is the twelfth supervisory,
[device type] indicates the type of device
causing the supervisory, and IN SUP identi-
fies the item as an off-normal supervisory.
(Press HELP if you want information on
what to do. The System displays:
PRESS ENTER TO ACK. PRESS NEXT
TO SKIP
Press HELP again to return to the previous
display.)
Press ENTER to acknowledge the supervi-
sory shown. The System prints a message
similar to the following and removes that
supervisory from the unacknowledged
supervisory list:
ACK SUPERV 32-045 16:11:44 Aug 2,20XX
#12 [custom message], [device type]
In the above message, the time and date
are the time and date the supervisory was
acknowledged and 32-045 is the address.
IN SUP
Operation
3-19