Mkb Menu Option To Enable, Disable And Erase History; Enabling The History Option In Csg-M; From The Mkb Menu - Siemens MXL-IQ Operation, Installation, And Maintenance Manual

History Log
Logging Item Selection
The system designer can log one or many
event types. The selection is determined by
the system requirements, the amount of
event storage, and the external data base
design. The following list summarizes event
types that can be selected.
*The items marked with an asterisk are set
MKB Menu Option to
Enable, Disable and Erase
History
Effective with MXL-IQ Revision 6.0, this
option allows the user with the highest level
password to turn on, turn off, or erase the
History, provided that this system option
has been enabled in the CSG-M and the
History mode is other than NONE (that is,
either small or circular).

Enabling the History Option in CSG-M

From the Main Menu, select System
Configuration Edit, then select Options,
6-4
* ALARMS
* TROUBLES
* SUPERVISORIES
* SECURITIES
STATUS CHANGES
DEVICE VERIFICATION
OUTPUT ACTIVATIONS
* RESET
* BLOCK ACKNOWLEDGE
* AUDIBLE CONTROL
SET SENSITIVITY
AUTO SET SENSITIVITY
* ARM/DISARM
* ENERGIZE/DE-ENERGIZE
* SET TIME
* PASSWORD
OVERRIDE
as default when the logging option is first
selected. At least one event type must be
selected.
System Message Authorization, then select
History Recording Options. From History
Recording Options, move the cursor down
to the line that reads Enable History Log Via
MKB Menu, and select YES to compile the
CSG-M program and download it to the
MXL-IQ. (Refer to Screen 2.)

From the MKB Menu

Go to the TEST menu, move the cursor to
the right until it highlights the Event-Log
Menu item, and press Enter to bring up the
submenu for MXL History. Move the cursor
within the submenu to either the left or right
to highlight the Hist_Ctrl item to turn on/off
the History, or Hist_Erase to erase History.
Notice that if the CSG-M system option
Enable History Log Via MKB Menu is set
to NO, these submenus are not accessible.
History turned on or off using the MKB
menus is unaffected through PANEL
RESET, and defaults to the setting in
CSG-M upon power-up.
Pressing ENTER while the cursor is on
Hist_Erase displays the following message
on the MKB asking for confirmation:
Enter to proceed, other key to abort
Pressing ENTER erases the History section
in the flash no matter what state the History
is currently in (manually turned on or off);
pressing any other key aborts the action.
Manual manipulation of History using the
MKB is logged in History as in the following
examples:
History Manually Erased History Manually Erased History Manually Erased History Manually Erased History Manually Erased
History Manually Turned off History Manually Turned off
History Manually Turned off History Manually Turned off History Manually Turned off
History Manually Turned on History Manually Turned on History Manually Turned on History Manually Turned on History Manually Turned on
NOTES:
1. The operator should download the
history log for future reference before
erasing the MXL-IQ's History, since once
the history is erased it cannot be
undeleted.
2. The history menu options do not alter the
history mode selected in the CSG-M.