Table of Contents
Advertisement
Description
Figure 27
Silent Knight Model 5128/5129 Digital Fire Communicator
INTELLIGENT/
The intelligent/analog devices described below are available for use with the MXL-IQ Control
ANALOG DEVICES
Panel. The UL identifiers for compatibility are the same as the model names specified below.
FP-11 Intelligent/Analog Photoelectric
Detector
The FP-11 is an intelligent/analog photo-
electric detector with 135
ture thermal assist that can be used as an
area or duct detector [FP-11(d)]. The FP-11
is also a combination photo/thermal detec-
tor using our exclusive FirePrint
ogy. It uses either a DB-11 low profile
mounting base or DB-3S mounting base
with the DB-ADPT adapter, a DB-X11RS
mounting base with relay or DB-X3RS
mounting base with relay with the DB-ADPT
adapter, an ADBX-11 audible base, or an
AD-11P or AD-11XPR air duct housing.
The FP-11 requires MXL-IQ Rev. 6.0 or
higher firmware.
FPT-11 Intelligent Thermal Detector
The FPT-11 is an intelligent/analog fixed-
temperature or fixed temperature /rate-of-
rise thermal detector. It can only be used as
an area detector. It uses either a DB-11 low
profile mounting base or DB-3S mounting
base with the DB-ADPT adapter, a
DB-X11RS mounting base with relay or
DB-X3RS mounting base with relay with the
DB-ADPT adapter, or an ADBX-11 audible
base. The FPT-11 requires MXL-IQ Rev.
6.0 or higher firmware.
1-14
Silent Knight Model 5128/5129 Digital
Fire Communicator
The MXL-IQ reports system conditions to a
Central Station using the Silent Knight
Model 5128/5129, a four-channel digital
communicator that reports alarm, trouble,
supervisory, and miscellaneous status.
When used with the MXL-IQ, the Silent
Knight Model 5128/5129 uses the alarm,
trouble, and supervisory channels. The
miscellaneous status channel may be used
to annunciate conditions other than fire at
the Central Station.
ICP Intelligent Control Point
The ICP is an intelligent control point that
can be used as an independent, remotely
O
fixed tempera-
located notification appliance circuit (NAC).
It communicates through the analog loop of
the MXL-IQ System.
TM
technol-
ICP-B6 Intelligent Control Point
The ICP-B6 is an intelligent control point
that can be used as an independent,
remotely located notification appliance
circuit (NAC). It communicates through the
analog loop of the MXL-IQ System.
ID-60P Intelligent/Analog
Photoelectric Detector
The ID-60P is an intelligent/analog photoelec-
tric detector that can be used as an area or
duct detector [ID-6OP(d)]. It uses either a
DB-3S low profile mounting base, a DB-X3RS
mounting base with relay, an AD-3P duct
housing, or an ADBI-60 audible base.
ID-60PT Intelligent/Analog Photo-
electric Detector with Heat Sensor
The ID-60PT is an intelligent/analog rate-
compensated/fixed-temperature type
thermal and photoelectric detector. It can
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
