Table of Contents
Advertisement
General information and networking
1.4 Networking
1.4.2
Commissioning TCU
1.4.2.1
Using the TCU's main menu
Key assignment
Functions of the keys and softkeys in the "Operator panel service system":
Softkey
Page
Page
Char
Char
---
---
Exceptions to the above are mainly the result of input fields. Where these are present, the left/
right cursor keys move the input cursor rather than performing an OK/cancel function. The
Return key takes you to the next field (like the "down" key) rather than closing the entire dialog
with OK. There are also Backspace (deletes character to the left) and Delete (deletes character
to the right) keys for editing text and numbers. The F5, F6, Backspace, Delete, and Select
keys (between the cursor keys on the panel) can be used to switch between Yes/No fields.
Touch panels without any additional keys still have a special function which allows you to edit
letters and numbers with HSK5/HSK6 by moving characters forwards or backwards. With a
touch screen, you can activate all the softkeys and even select rows in a menu simply by
touching them.
See also: How to calibrate a touch panel (Page 58)
"Main menu"
The dialog "Main menu (TCU1)" is started with the menu back key and the key <MENU SE‐
LECT>:
42
Key on OP
HSK1
HSK2
HSK3
HSK4
HSK5
HSK6
VSK7
Cancel
VSK8
Ok
External key‐
Description
board
<F1>
Moves the cursor down a row
<F2>
Moves the cursor up a row
<F3>
Moves the cursor down a page
<F4>
Moves the cursor up a page
<F5>
Inserts text or digits
<F6>
Inserts text or digits
←
Cancel / Return
→
OK / Confirm
Pos1
Moves the cursor to the top row
End
Moves the cursor to the bottom row
Operator panel front: OP 010
Manual, 07/2018, A5E36371538B
Advertisement
Table of Contents
