Ps-5A Power Supply; Rcc Remote Command Center; Rdm-Pc Remote Diagnostics Module - Siemens MXL-IQ Operation, Installation, And Maintenance Manual

PS-5A Power Supply*

The PS-5A is a power supply that can be
used with the D2300CP or MOI-7. The
power supply has enough power to run both
the D2300CP and MOI-7 modules.

RCC Remote Command Center

The RCC-1 Remote Command Center is
an optional MXL/MXLV System remote
keyboard panel. The RCC-1F Remote
Command Center, which is used for flush
mounting applications, has a ¾-inch flange
on all four sides of the enclosure.
The RCC-2/R provides the option to
remotely annunciate and control MXL and
MXL-IQ system status, including the
mounting and control of the PIM-1 printer
interface module.
The RCC-3/-3C/-3F/-3FC has a multi-line
display that continuously updates informa-
tion about the system event status. The
user can view up to 8 events at a time and
can scroll through the complete list using
the UP and DOWN keys located next to the
More Info key.

RDM-PC Remote Diagnostics Module

The RDM-PC allows connection of a
remote computer to an MXL-IQ. The RDM
for MXL PIM-1 (RDM-MXL) connection is
made via a telephone line. After communi-
cation is established, the remote computer
will function like a VDT connected locally to
the MXL. Secure access to the MXL is
guaranteed by using a callback procedure.
This means that the MXL cannot connect to
any unknown or unauthorized site. The
Remote Diagnostic option for the MXL
VDT configuration in the CSG-M must be
enabled (by selecting YES).
Figure 25
PS-5A Power Supply
RCC-2/R
Figure 26
Remote Command Centers
RCC-1/1F
RCC-3/-3C/-3F/-3FC
Description
1-13